RAINGUARD - AN ELASTOMERIC PAINT (The future of External
Paint)
Gubbi Paints is a Leading Manufacturers &
Suppliers of Industrial & Residential paints in Thane. Offering its customers a variety of
innovative decorative painting solutions, valuable services at an affordable
price.
Rainguard available in packing's of 5 kg & 25 kg.
Price per kg is Rs. 160 + 5 % VAT or 2 % CST.
Rate for 25 kg = Rs. 4,200
Rate for 5 kg = Rs. 900
Coverage :-
In 1 kg you will get 45 to 50 sq.ft area coverage. (
Primer + 2 coats)
Dilution :-
Primer :- Dilute in 1:1 ratio and apply for priming.
1st coat :- dilute with water 20 per cent in proportion
with 1 kg Paint.
2nd coat :- dilute with water 15 per cent in proportion
with 1 kg Paint.
No need to use different primer, the paint itself is a
primer.
Per Sq.Ft material cost at just Rs. 4 to Rs. 4.2
It is heat proof paint cum coating. it reduce 4 to 6
degree heat.
Contact:
L. Satish - 09324569585
Vidya - 07498814262
DESCRIPTION..!
RAINGUARD is an Elastomeric polymer with the property of
viscoelasticity (elasticity), generally having notably low Young's modulus and
high yield strain compared with other materials.
The coating enables long term protection from vegetation,
algae, dust, and atmospheric gases such as CO2, SO2 & chlorides, heat
etc...!
APPLICATIONS OF RAINGUARD..!
* Residential
and commercial buildings,
* Multi storey
car parks & podiums.
* Overhead
water tanks.
* Industrial
buildings and & power plants.
* Chimney
* Bridges.
ADVANTAGES OF RAINGUARD..!
# Prevention
from water ingress,
# Prevention
from vegetation, algae, dust.
# Prevention
from carbon.
# Prevention
from heat, U.V.
# Good physical
and chemical properties.
# Low cost.
# Washable
coating with durability
# Very high
crack bridging capacity
DIRECTION FOR USE OF RAINGUARD..!-
RAINGUARD must be coated after completion of curing
period.
TECHNICAL DATA SHEET..!-
Property Value
Color White or / any custom color
Brookfield Viscosity
RVT( C``PS)SP.4 30
RPM at 25˚c 8.5 ± 0.5
Total Solids by % 66 ± 1.0
Density (gm/cm³) 1.3 ± 0.2
Ph at 25˚c 8.5 ± 0.5
Tensile Strength 400 ±
50
Elongation (%) 300 to 400%
Clean Up Water
INSTALLATION..!
* All surfaces
to be coated must be clean, dry and redo loose & deboned plaster.
& Cracks are to
be filled from crack filler material.
* Before
application, any loose adhered coating must be removed.
* Prime the
surface with RAINGUARD diluted at 1:1 ratio (by volume) with water.
& Dilution for
1st coat 15 per cent & for 2 nd coat 10 per cent (by volume) with water.
* Containers
should not be left opened for extended periods of time.
& Spray: Airless Sprayer, 1gpm, 3,000 psi.
& Brush: Good quality synthetic bristle brush.
& Roller: Short nap roller.
& Clean
Up: Water
PRIMING..!
Prime the surface with RAINGUARD diluted at 1:1 ratio (by
volume), with water. Allow primer to dry at least for 4 hours.
How RAINGUARD is to be applied?
Rainguard three coat recommended thickness is 200 to 250
microns. After priming apply 1st coat of RAINGAURD and let it dry for 4 hours.
and then apply second coat.
CURING..!
RAINGUARD is self-curing.
EQUIPMENT..!-
Airless sprayer, medium nap roller, or brushes.
CLEANING..!-
Clean tools and equipment with water before RAINGUARD
dries.
COVERAGE.!.
Each pack of 1 kg is sufficient for an area of 40 to 45
square feet, to achieve recommended thickness of 200 to 250 microns.
STORAGE..!
It should be stored between 5˚c to 40˚c, avoid exposure
to sunlight and Keep containers closed when not in use.
SAFETY PRECAUTIONS..!
Hazardous Identification:-
Prolonged or repeated contact may cause skin or / eye irritation. May be harmful if swallowed.
Protect from freezing.
FIRST AID MEASURES..!
Eye contact:-
After initial flushing, remove any contact lenses and
continue flushing for at least 15 minutes. Get medical attention if irritation
develops or persists.
INHALATION..!
If inhaled, remove
to fresh air. Not breathing well, give an artificial respiration. Get medical
attention if coughs or / other symptoms develop.
SKIN CONTACT..!
Remove contaminated cloths and shoes. Wash affected area
immediately with large amount of water and soap. Get medical attention if it
persists.
Contact: -
Gubbi Paints (A division of Gubbi Group of Companies)
18 / 26, Dev Prayag Society,
Bhakti mandir Road, Near Hari Niwas Circle,
Pachpakhadi, Thane (W) - 400 602.
Tel no. 022 - 2539 3839, Telefax . 022 - 2539 2279
Mob No. 7498814262
E-mail: gubbipaints@gmail.com
Web site:
www.elastomericcoating.in
No comments:
Post a Comment